Contractor-friendly repeater assemblies that support RDM, for permanent installation.

4813 Installation Repeater
4813 Installation Repeater


Data Sheet



.DWG    .PDF


RDM-enabled opto-splitters in NEMA1 assemblies, for permanent installation. Complete with conduit knockouts and terminal strip connections for fast, easy installation. ETL certified.

  • Internally pre-configured and pre-wired, ready for installation
  • Four, eight or twelve output models
  • Up to three inputs, or daisy-chain a single source
  • Removable terminal strip connectors
  • No fuses—data links self-reset after overcurrent removed
  • Wide range power supply
  • Power, processor and DMX/RDM activity LEDs
  • Per-port ISO 5V and RDM activity LED indicator
  • 2500V opto-isolation between input and output ports
  • 250V fault protection on input and output ports
  • 6W power consumption per installed 4-way module
  • Operating conditions: 0-40°C; 10-90% relative humidity, non-condensing
  • ANSI E1.11 DMX512-A
  • ANSI E1.230 RDM (Remote Device Management)
  • RoHS 2002/95/EC
  • ETL-listed
  • 4813: 10.25” x 13.25” x 4.5” (260mm x 335mm x 120mm)
    9.3 lb shipping weight (4.25 kg)
  • 4814: 10.25” x 23.25” x 4.5” (260mm x 590mm x 120mm)
    14.3 lb shipping weight (6.5 kg)
  • 4815: 10.25” x 23.25” x 4.5” (260mm x 590mm x 120mm)
    14.3 lb shipping weight (6.5 kg)




eDIN DMX/RDM Installation Repeater, 4-way


eDIN DMX/RDM Installation Repeater, 8-way


eDIN DMX/RDM Installation Repeater, 12-way