1029 NFP+

Pathway Connectivity’s NFP+ (Network Fade Processor Plus) receives ASCII text commands from Crestron and AMX control systems and converts them to DMX512 directly, as well as to Pathport Protocol, Art-Net or E1.31 sACN. The NFP+ calculates fades as necessary, removing all computational overhead from the controller while ensuring the proper DMX refresh is maintained.

Easily mounted on 35mm DIN rail, the NFP+ consolidates ASCII string conversion and DMX output into a single device.

  • Outputs two universes (1024 channels) of DMX512
  • Transmit the same data as Pathport, Art-Net or sACN
  • Multiple NFPs may reside on the same network with or without additional Pathport output gateways
  • Simple command structure incorporates channel lists, ranges and concatenation
  • New universe release/port shutdown command
  • Commands may be sent individually or as a consolidated text file
  • Compatible with any controller capable of sending ASCII text strings via UDP unicast (Crestron, AMX and most automation controllers)
  • Handles all fade algorithms and maintains DMX refresh
  • 1024 simultaneous fades possible
  • Power-over-Ethernet or 24VDC operation
  • PoE Class 1
  • 4W maximum power consumption
  • Operating conditions: -10to +50°C; 5-95% relative humidity, non-condensing
  • IEEE 802.3af Power over Ethernet
  • ANSI E1.31 sACN
  • RoHS 2002/95/EC
  • Class 2 Low Voltage
  • 2.5 lbs (1.12 kg)
  • 6.25”W x 6.25”L x 4”H  (159mm x 159mm x 102mm)
  • Installation/Operations manual
  • Pluggable terminal strip connectors
  • 12" (30cm) section of 35mm DIN rail




Pathport NFP+, includes two DMX512 outputs



50 Watt, 24VDC Power Supply, DIN-Mountable


Rack-mount Panel Kit (2RU) with
two 16.5” (420mm) sections of DIN rail


Small eDIN Enclosure (NEMA1) with
9.5” (240mm) of  vertical DIN rail


Large eDIN Enclosure (NEMA1) with
19.5” (495mm) of vertical DIN rail


Large eDIN Enclosure (NEMA1) with
three rows of 9.5” (240mm) horizontal DIN rail


eDIN Enclosure Assembly Service