eDIN #1009 DMX/RDM Opto-splitters provide full isolation between ports and RDM-compatibility.

 eDIN #1009 DMX/RDM Splitter

The eDIN #1009 is a DIN-rail mountable four-way opto-splitter that supports the bi-directional communication standard E1.20 Remote Device Management (“RDM”), as well as DMX512.  Used in installations that require ‘star’ wiring configurations, all output ports are separate electrical entities, fully opto-isolated and independently protected against fault voltages.

  • One DMX512 /RDM input port
  • Four fully isolated DMX512/RDM bi-directional output ports
  • One active DMX512/RDM bi-directional thru port
  • Pluggable terminal  blocks for all connectors
  • Power and data easily daisy-chained between modules
  • DMX IN indicator
  • DC Power input indicator
  • ISO 5V indicator
  • Auto-termination of DMX THRU
  • No fuses— self-resetting port protection recovers from voltage faults
  • 2500V opto-isolation between input and output ports
  • 250V fault protection on input and output ports
  • Input operating voltage: 9-30 VDC
  • 6W power consumption
  • Operating conditions: -10° to +50°C; 10-90% relative humidity, non-condensing
  • ANSI E1.11 DMX512-A(2008)/USITT DMX512(1990)
  • ANSI E1.20 RDM(2010) - Remote Device Management
  • RoHS 2002/95/EC
  • Class 2 Low Voltage
  • 0.70 lbs (0.316 kg)
  • 3.6”W x 6.25”L x 1.5”H  (91mm x 160mm x 38mm)

Model

Description

1009

eDIN DMX/RDM Splitter, 4-Way

For pre-assembled, contractor friendly installation repeaters based on the #1009 interface, order from the following part numbers:

4813

eDIN DMX/RDM Installation Repeater, 4-way,
c/w power supply, internally pre-wired, ETL-listed

4814

eDIN DMX/RDM Installation Repeater, 8-way,
c/w power supply, internally pre-wired, ETL-listed

4815

eDIN DMX/RDM Installation Repeater, 12-way,
c/w power supply, internally pre-wired, ETL-listed

Accessories

1001-030-24-DIN

30 Watt, 24VDC Power Supply, DIN-Mountable

1001-100-24-DIN

100 Watt, 24VDC Power Supply, DIN-Mountable

1103

eDIN Rack Mount Panel,
2RU high, two 16.5" DIN Rail

1105

eDIN System Enclosure, 10" x 13" x 4.5"
c/w One 9" Vertical DIN Rail

1106

eDIN System Enclosure, 10" x 23" x 4.5"
c/w One 19" Vertical DIN Rail

1107

eDIN System Enclosure, 10" x 23" x 4.5"
c/w Three 9" Horizontal DIN Rail

1108

eDIN System Enclosure, 10" x 13" x 4.5"
c/w Two 9" Horizontal DIN Rail

1109

Expanded eDIN System Enclosure 18.5" x 31.5" x 6.5"
c/w Three 24"Vertical DIN Rail,
One 18” DIN Rail in Class 1 section,
two 3-gang knockouts in removable door

4000

eDIN Enclosure Assembly Service